FINLAND
 Products  Support and others

Alpine Navigation Application Update INE-W920R / INE-W925R / INE-W928R / INE-W977BT

 

Requirements and limitations:

  • Windows XP / Windows 7 / Windows 8
  • Micro SD card with minimum 512 MB recommended  (INE-W920R / INE-W925R)
  • SD card with minimum 512 MB recommended (INE-W928R / INE-W977BT)

Notes:

  • If you have G500_SD-card-Tool installed, please remove the 16 GB SD card for the update and reinsert the SD card after the update. Don’t touch or use this SD card for this Navigation Application Update!
  • For TRUCK-G500 / TRUCK-G500C, please remove the SD card and reinsert the SD card after the update. Don’t touch or use this SD card for this Navigation Application Update!

Release Notes

  • Enhanced GPS performance
  1. Download << AU_INE-W92xR_W977BT_xxxxxxxx.zip >> to your PC.
  2. Connect an empty (Micro) SD card to your PC.
  3. Extract the file (i.e. with WinZip / IZArc) onto the (Micro) SD card.
  4. Safely remove the (Micro) SD card from your PC.
  5. Insert the (Micro) SD card into INE-W920R / INE-W925R / INE-W928R / INE-W977BT.
    INE-W920R / INE-W925R: Remove the detachable faceplate to access the Micro SD card slot.
    INE-W928R / INE-W977BT: Open the display to access the SD card slot.
  6. Apply the detachable faceplate (INE-W920R / INE-W925R) / Close the display (INE-W928R / INE-W977BT)  and power the unit on by turning on the ignition.
  7. The Update starts automatically – once finished after approximately 1-2 minutes, the unit will reboot.
  8. Remove the (Micro) SD card.